Introducing the all new Scorpion ADX-1, a versatile modular Adventure Touring helmet. It has features and quality that you would expect to pay three times more for.
The ADX-1 can be used as a full face adventure helmet with external peak visor attached, or the peak visor can be removed and you have an aerodynamic touring helmet. Our oversized eye port is extremely wide for greater peripheral vision and downward visibility, and the modular chin-bar can be conveniently flipped up when you stop to get gas or ask for directions. The internal drop down Speedview® sunvisor and KwikWick® II liner will keep you comfortable all day long even as lighting conditions change throughout the day and you can use the ADX-1 as a dirt helmet with goggles for off-road use. Three shell sizes made of Advanced LG® Polycarbonate and dual density EPS, result in a helmet that is light weight, strong, and protective.
*Please note: colour/dark tint visors are for display purposes only. This helmet is supplied with a clear visor as standard.
When you order a helmet online, we can only accept a return when the helmet is unworn and HAS NOT been used out on the motorcycle. When you receive your helmet, please try it on for around an hour in the comfort of your home, do not go out on the motorcycle with it. If the helmet is too loose or too tight, get in touch, and we will help to provide a return.
Circumference Measurement: Wrap a measuring tape around your head, starting from the centre of your forehead. Measure about and inch above your eyebrows and hold the tape comfortably snug. Take the length and complete it again for good measure. Use the largest of the two readings.
ScorpionExo® claim to be the next wave in motorcycle helmet design. Helmets are engineered by some very experienced helmet designers, with over 178 years of cumulative experience. Their wild, innovative graphic designs are created in hotbeds of extreme-sports creativity all over the world, from Europe to Southern California, to stay two steps ahead in this fast-moving field.
The Scorpion Sports factory, ‘The Big Nest’ is dedicated to crafting some of the world's best protective headgear. Almost every operation needed to create world-class helmets is located on this one amazing facility, including both fiberglass/Kevlar™ and polycarbonate shell moulding, EPS liner manufacturing, liner sewing, water-decal production, clean-room paint booths, drying rooms, assembly, packaging and shipping. This way the factory can monitor the quality and is not dependent on outside suppliers.
The American based company is relatively new to the UK market and has made a strong impact with the quality of its products. Features such as the Airfit system, which allows you to add pressure on the cheek pads, and their sprung visor mechanisms which help the visor seal against the shell keeping noise and drafts to a minimum all point to a quality product.
They’ve also done well in the Sharp test which proves their crash quality.
There are a number of full and open face models in the range as well as a great flip front. Obviously all Scorpion helmets met ECE22-05 and all have been approved by the TUV testing centre in Germany.
If not, why not speak with an Infinity expert for help and advice.0800 130 3377